you an apply with a sprayer please see the specifications below
Thank you
Spray Application
Use an air atomized or airless spray, roller, squeegee o
brush. A combination of methods may be most effective.
For example, on a flat roof, pour a serpentine bead of
material from the pail. Distribute it with squeegee. Finish it
with a short nap roller to press air out of cracks and even
out the wet film.
A.) Equipment:
Use a 3 gallon per minute airless spray
pump capable of developing a minimum 3,000 psi outlet
pressure. It should have a 3/8” ID hose or larger with
a max length of 100 ft. Use a tip size of .015 or .017 for
smaller pumps and a .019 tip for larger capacity pumps.
Use a 100 mesh strainer at the outlet of the pump or in the
handle of the gun. Use a swivel fitting at the gun in place
of a “whip” in order to reduce the pressure drop through a
smaller ID hose.